Milesight AT101
Milesight Outdoor Tracker | LoRaWAN | GNSS | WiFi AP scanning | Normal/Tilt | Temperature | NFC Configuration | 4 x 2700mAh battery | 15 years | IP67
Description
The AT101 from Milesight is a LoRaWAN Outdoor tracker that uses GNSS and WiFi technology to accurately monitor assets used outdoors.
The sensor can be used in three modes: Motion, Timing & Periodic mode. The motion mode records data of every start and stop movement you make via GPS. The timing mode records data at preset times linked to a specific location. The periodic mode records data at set intervals and transmits it.
If no strong GPS signal is available, the sensor uses WiFi scanning to still be able to display an accurate position.
You can also activate geofencing and monitor your assets, allowing you to create a virtual location and designate which assets may not be moved off the site. If the assets are moved, you as the user receive a notification that your assets have been moved off the site.
Via Bluetooth or NFC you can set up the sensor for use, and this device can also store its data locally in the event of signal loss.
By default the AT101 is supplied with batteries, double-sided tape and mounting screws.
Key benefits
Technical specifications
AT101-868M
Milesight
AT101-868M
LoRaWAN
868 MHz
A
V1.1
1°
Normal/Tilt
5.0m (Direct line of sight)
Cold Start: 37s Average, Hot Start: 1s Average
NFC (android app), at101
4 × 2700 mAh ER14505 Li-SOCl2
15 years
-30 to +70 °C
3M Tape, On flat surface with screws, Tiewrap
IP67
IK09
202 g
110 × 70 × 30 mm
Tracker
Milesight